Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Local Storage


The local storage connector is accessed from the Connectivity tab of the design component palette:

This connector is used to first configure a local storage connection for access to a machine running a Jitterbit Harmony Private Agent, and then to configure one or more local storage activities associated with that connection to use as a source or target within an operation or script:

  • Read: Reads data from a local storage connection and is used as a source in an operation or called in a script.
  • Write: Writes data to a local storage connection and is used as a target in an operation or called in a script.

Together, a specific local storage connection and its activities are referred to as a local storage endpoint.

CAUTION: Local storage endpoints cannot be used with Cloud Agents.

Once a connection is configured, activities associated with the endpoint are available from the Endpoints filter:

Enabling Local Storage

To use local storage, you must be using a Jitterbit Harmony Private Agent, and the local storage must reside on the machine where the Private Agent is installed.

In addition, you must have the Private Agent configured to allow local storage connections. By default, Private Agents are configured to prevent use of local storage. See Enabling Local File Location to change the default setting in the Private Agent configuration file to enable local storage connections.

On This Page

Pages in This Topic

Search in This Topic

Last updated:  Nov 08, 2019

  • No labels